Wearable sensors for patient-specific boundary shape estimation

It has been shown that accurate boundary form of the forward model is important to minimise artefacts in reconstructed EIT images. This paper presents a proposal for a wearable device based on a network of flexible sensors to evaluate patient-specific boundary form of the forward model for lung EIT. Simulation of approaches using ideal sensors are presented that reconstruct boundaries with low shape error

Solvent-free synthesis and key intermediate isolation in Ni2Dy2 catalyst development in the domino ring-opening electrocyclization reaction of furfural and amines

A solvent-free methodology that yields trans-4,5-diaminocyclopent-2-enones, main domains of natural products and a variety of N-heterocycles, is described. The bimetallic catalyst [NiII2DyIII2L4(DMF)6] 2(OTf) 2(DMF) (1) promotes the domino reaction of furfural and amines, with loadings as low as 0.01%, under stirring or microwave-assisted conditions to afford the corresponding frameworks in very good to excellent yields. Crystallographic and theoretical studies shed light on the exclusive formation of the trans-diastereoisomers via a 4π-conrotatory electrocyclization process elucidating the key step in the catalytic process

A Structurally Characterized Cobalt(I) σ-Alkane Complex

The synthesis, and x-ray structure, of a cobalt s -alkane complex, [Co(Cy 2 P(CH 2 ) 4 PCy 2 )( norbornane )][BAr F 4 ], is achieved by a single-crystal to single-crystal solid/gas hydrogenation from a norbornadiene precursor. Magnetic data show this complex to be a triplet. Periodic DFT and electronic structure analyses identify weak C-H ··· Co σ -interactions, augmented by dispersive stabilisation between the alkane ligand and the anion-microenvironment. The calculations are most consistent with a η 1 : η 1 -alkane binding mode

First examples of functionalisation of meso-aryl tetrabenzotriazaporphyrins (TBTAPs) through cross-coupling reactions

Recent synthetic advances have given convenient access to tetrabenzotriazaporphyrins (TBTAPs) functionalised with meso-aryl substituents. In this paper we report the first examples of further functionalization of the meso-sites through Suzuki-Miyaura and copper-free Sonagashira cross-coupling reactions of the meso-(bromophenyl)TBTAPs, demonstrating the breadth of new materials design now possible in the hybrid macrocycles

DICOM for EIT

With EIT starting to be used in routine clinical practice [1], it important that the clinically relevant information is portable between hospital data management systems. DICOM formats are widely used clinically and cover many imaging modalities, though not specifically EIT. We describe how existing DICOM specifications, can be repurposed as an interim solution, and basis from which a consensus EIT DICOM ‘Supplement’ (an extension to the standard) can be writte

Towards a thoracic conductive phantom for EIT

Phantom experiments are a crucial step for testing new hardware or imaging algorithms for electrical impedance tomography (EIT) studies. However, constructing an accurate phantom for EIT research remains critical; some studies have attempted to model the skull and breasts, and even fewer, as yet, have considered the thorax. In this study, a critical comparison between the electrical properties (impedance) of three materials is undertaken: a polyurethane foam, a silicone mixture and a thermoplastic polyurethane filament. The latter was identified as the most promising material and adopted for the development of a flexible neonatal torso. The validation is performed by the EIT image reconstruction of the air filled cavities, which mimic the lung regions. The methodology is reproducible for the creation of any phantom that requires a slight flexibility

Detecting colorectal cancer using electrical impedance spectroscopy: an ex vivo feasibility study

Objective: Colorectal cancer is the fourth most common cancer worldwide, with a lifetime risk of around 20%. Current solutions do not allow clinicians to objectively assess tissue abnormality during endoscopy and perioperatively. A solution capable of objectively assessing samples in real time could greatly improve the treatment process. A solution that can be integrated in minimally invasive diagnostics and management strategies to provide real-time point-of-care information would be greatly transformative. Electrical impedance spectroscopy (EIS) may provide such a solution. In this paper, we present a feasibility study on using EIS in assessing colorectal tissue. Approach: We performed tetrapolar EIS using ZedScan on excised human colorectal tumour tissue and the matched normal colonic mucosa in 22 freshly resected specimens following elective surgery for colorectal cancer. Histopathological examination was used to confirm the final diagnosis. Statistical significance was assessed with Wilcoxon signed rank test. Main results: Tetrapolar EIS could discriminate cancer with statistically significant results when applying frequencies between 305 Hz – 625 kHz (p < 0.05). 300 Ω was set as the transfer impedance threshold to detect cancer. Thus, the area under the corresponding receiver operating characteristic curve for this threshold was 0.7105. Significance: This feasibility study demonstrates that impedance spectra changes in colorectal cancer tissue are detectable and may be statistically significant, suggesting that EIS has the potential to be the core technology in a novel non-invasive point of care test for detecting colorectal cancer. These results warrant further development and increasing the size of the study with a device specificity designed for colorectal cancer

Modulation of σ-Alkane Interactions in [Rh(L2)(alkane)]+ Solid-State Molecular Organometallic (SMOM) Systems by Variation of the Chelating Phosphine and Alkane : Access to η2,η2-σ-Alkane Rh(I), η1-σ-Alkane Rh(III) Complexes, and Alkane Encapsulation

Solid/gas single-crystal to single-crystal (SC-SC) hydrogenation of appropriate diene precursors forms the corresponding σ-alkane complexes [Rh(Cy2P(CH2)nPCy2)(L)][BArF 4] (n = 3, 4) and [RhH(Cy2P(CH2)2(CH)(CH2)2PCy2)(L)][BArF 4] (n = 5, L = norbornane, NBA; cyclooctane, COA). Their structures, as determined by single-crystal X-ray diffraction, have cations exhibiting Rh···H-C σ-interactions which are modulated by both the chelating ligand and the identity of the alkane, while all sit in an octahedral anion microenvironment. These range from chelating η2,η2 Rh···H-C (e.g., [Rh(Cy2P(CH2)nPCy2)(η2η2-NBA)][BArF 4], n = 3 and 4), through to more weakly bound η1 Rh···H-C in which C-H activation of the chelate backbone has also occurred (e.g., [RhH(Cy2P(CH2)2(CH)(CH2)2PCy2)(η1-COA)][BArF 4]) and ultimately to systems where the alkane is not ligated with the metal center, but sits encapsulated in the supporting anion microenvironment, [Rh(Cy2P(CH2)3PCy2)][COÅBArF 4], in which the metal center instead forms two intramolecular agostic η1 Rh···H-C interactions with the phosphine cyclohexyl groups. CH2Cl2 adducts formed by displacement of the η1-alkanes in solution (n = 5; L = NBA, COA), [RhH(Cy2P(CH2)2(CH)(CH2)2PCy2)(κ1-ClCH2Cl)][BArF 4], are characterized crystallographically. Analyses via periodic DFT, QTAIM, NBO, and NCI calculations, alongside variable temperature solid-state NMR spectroscopy, provide snapshots marking the onset of Rh···alkane interactions along a C-H activation trajectory. These are negligible in [Rh(Cy2P(CH2)3PCy2)][COÅBArF 4]; in [RhH(Cy2P(CH2)2(CH)(CH2)2PCy2)(η1-COA)][BArF 4], σC-H → Rh σ-donation is supported by Rh → σ∗C-H "pregostic" donation, and in [Rh(Cy2P(CH2)nPCy2)(η2η2-NBA)][BArF 4] (n = 2-4), σ-donation dominates, supported by classical Rh(dπ) → σ∗C-H π-back-donation. Dispersive interactions with the [BArF 4]- anions and Cy substituents further stabilize the alkanes within the binding pocket

Cross-sectional chest circumference and shape development in infants

Objective: This study investigates the development of the thoracic cross-section at the nipple line level during the early stages of life. Unlike the descriptive awareness regarding chest development course, there exist no quantitative references concerning shape, circumference and possible dependencies to age, gender or body weight. The proposed mathematical relations are expected to help create guidelines for more realistic modelling and potential detection of abnormalities. One potential application is lung electrical impedance tomography (EIT) monitoring where accurate chest models are crucial in both extracting reliable parameters for regional ventilation function and design of EIT belts. Despite their importance, such reference data is not readily available for the younger age range due to insufficient data amid the regulations of neonatal imaging. Results: Chest circumference shows the highest correlation to body weight following the relation fx=18.3735ln0.0012x+2.1010 where x is the body weight in grams and f(x) is the chest circumference in cm at the nipple line level. No statistically significant difference in chest circumference between genders was detected. However, the shape indicated signs of both age and gender dependencies with on average boys developing a more rectangular shape than girls from the age of 1 years and 9 months